SS1-70K5
Combining optical and electronic technology, it adopts RS485
communication mode, with response time as short as 200μs,
which can accurately and quickly identify and
distinguish various colors.
Technical specifications
specification | |||
Model | SS1-70K5-2M(with cable) | ||
Measured range | 30-70mm | ||
Minimum spot size | 4.5 mm×4.5 mm,Measurement range 50mm | ||
Response time | 200 μs/500 μs/1 ms/10 ms/100 ms/ 500 ms, Switchable | ||
Light source | White LED | ||
Interference reduction | Set different frequencies. Support two sets | ||
Timer | Off/Switch on Delay/Switch off Delay / Single time | ||
Communication methods | IO、RS485 | ||
Power supply | Voltage | 10~30 VDC ,including±10% ripple (P-P),class 2 or LPS | |
Current | ≤60 mA, 24 VDC (without load) <110 mA, 12 VDC (without load) | ||
I/O | Control output | PNP/NPN Open Collector, switchable N.0./N.C.switchable | |
External input | Calibration/stop lighting, switchable Short circuit current: NPN:≤ímA / PNP:≤2 mA | ||
Protection circuit | Power reversed connection protection, power surge protection, output overcurrent protection, output surge protection, output reversed connection protection | ||
Environmental resistance | Waterproof | IP67 | |
Ambient light | Incandescent light: s10000 lx; Sunlight: s20000 lx | ||
Ambient humidity | -20〜+50℃(No freezing) | ||
Relative humidity | 35〜85%RH(No condensation) | ||
Shock resistance | 1000m/s 2 ,6 times each in X, Y, and Z directions | ||
Vibration resistance | 10~55Hz,1.5mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Materials | Shell: Aluminum alloy, with surface free of copper, nickel, and zinc | ||
LED Indicator cover:PC/PMMA | |||
Button:PC+ABS | |||
Lens cover: glass; Display cover plate: PMMA with coating to prevent damage | |||
Cable: PVC, load temperature 30-50 'C, high voltage test 300V (AC) leakage current not exceeding 2mA, insulation test 300V (DC) insulation resistance not less than 20M Q, with shielding (maximum length:10 meters) | |||
Weight: 107g, including cables |